Join Us at OTC — Booth #13454

otc_cmyk_450M&M Oil Tools welcomes our clients, partners, and suppliers to visit booth #13454 at the upcoming Offshore Technology Conference (OTC) May 2 – 5, 2016, at the NRG Park in Houston, Tx. We will have samples of our entire tool line-up on display, to showcase the quality and reliability of M&M products.

“This is a great chance to see what sets our tools apart, particularly the patented cartridge of our safety, kelly and top drive valves,” said David Buck, M&M Oil Tools CEO. “Though it’s a tough time for the energy industry, M&M is committed to product development—pushing the boundaries of innovation to offer superior tools that offer a better return on investment. This is our philosophy, in good times and bad.”

M&M Oil Tools was founded in 1944 as Matthews Rental Tools. Home of the original M&M casing scraper, the company offers a range of tools, for purchase or rent, with a robust design, including carbide mills, brush tools, boot baskets and well control valves.

New H2S Trim Valves: The Right Materials for the Right Application

M&M Oil Tools is now offering H2S trim on kelly, safety and top drive valves that conform to NACE MR0175 / ISO 15156. Re-engineered with upgraded materials—including corrosion resistant stainless steel alloys—H2S trim configurations are offered with working pressures of 10,000 psi, 15,000 psi and 25,000 psi.

“Our valves conform to API Specification 7-1*; we manufacture all H2S trim valve components to NACE standards,” said David Buck, M&M Oil Tools owner and CEO. “Unfortunately, not all of our competitors are so stringent with their materials and that shows in valves that crack and corrode prematurely. We always tell our customers to make sure they really know what is in their H2S trim valves, so they don’t use products that may be susceptible in a sour environment.”

M&M materials used in the manufacture of H2S valves:

  1. 17-4PH (UNSS17400): precipitation-hardening stainless steel in HH 1150 condition has been successfully used for mildly sour environments. According to NACE MR0175, 17-4PH is acceptable for valve components other than the body and bonnet, provided that the partial pressure of H2S does not exceed 0.5 psi.  Given that the valves are only “H2S trim,” they should not be used in severely sour conditions and that restriction is immaterial in the HH1150 condition.
  2. Tough Met AT110 (UNS C72900): a copper-nickel-tin alloy designed for use in applications demanding wear resistance, high-bearing performance and resistance to saltwater corrosion. NACE MR0175 indicates that copper alloys may be used without restriction in sour service conditions.
  3. Alloy X-750: a precipitation-hardened, nickel-chromium alloy specifically approved for springs by NACE MR0175 at hardness values up to 50HRC. It is a good alternative to 17-7H for retaining rings.

M&M Oil Tools well control valves, both standard and H2S trim, also offer the advanced design of the EZ-FLOW CARTRIDGE™. This new innovation provides for faster, easier and more reliable field service, while eliminating the need for special tools.

“Our double floating seats guarantee pressure by acting only across the downstream side of the ball and seat to minimize the load, prevent distortion of the ball and protect seat support arms,” said Buck. “These features, combined with the stem bearing, reduce the torque required to operate the valve. Our customers especially appreciate that each valve is provided with material certificates, test reports and Certificate of Conformance.”


*M&M Oil Tools manufactures products that are compliant to ANSI/API Specification 7-1 for Kelly Valves and Threading for Rotary Shouldered Connections

EZ-FIT CARTRIDGE™ and EZ-FLOW CARTRIDGE™ tools are covered by pending US and foreign patents.

EZ-FIT CARTRIDGE™ and EZ-FLOW CARTRIDGE™ are trademarks of M&M Oil Tools

Plant Expansion Adds New Machines, Increases Production

M&M Oil Tools has added 5,000 square feet to the existing plant in Breaux Bridge, LA to accommodate new machines and expanded production capabilities. Two new, high performance Mazak lathes are the latest additions to the advanced line-up of machine tools at M&M.

“Though our facility was built in 2012, we quickly outgrew the existing space with an increase in customer demand,” said David Buck, M&M Oil Tools CEO. “This is a great testament to the outstanding team we have built here at M&M as we always strive to enhance and improve operations. We have the right people, and now the right machines, to assure customers that our delivery times and quality will continue to exceed expectations.”

M&M Oil Tools was founded in 1944 as Matthews Rental Tools. Home of the original M&M casing scraper, the company offers a range of tools–for purchase and for rent–with a robust design, including carbide mills, brush tools, boot baskets and valves.